Centurion
Event Fence Mark 1
Needing
to direct large groups of people, cordon off areas or dress up your
event with a strong, attractive barrier then our exclusive Centurion
Event Fence 1 will fill the bill.
|
|
SM 1644 A
|
SM1644 B
|
It comes in two attractive designs SM 1644 A and SM 1644 B both have the same
specifications and they come standard with red and white reflective
water proof reflective labels.
They have been specially designed feet that can be easily removed to allow the
units to be stacked flat for storage Because the panel has been
manufactured from HDPE plastic it cant rust, scratch, chip or have
sections that can become sharp and the colour goes all the way
through. The addition of UV Inhibitors and Anti Brittleness agents
ensures that they stand up to all sorts of weather without fading or
crazing.
Each unit is 2000mm long x 1000mm high x 50 mm wide and comes in White, Yellow Or
Red. The panel weighs 13 kgs and the feet each weigh 3 kgs The feet
are made from specially hardened rubber that easily slip and lock
into the panel So you have a substantial barrier that will stand up
to all sorts of rough use.
The appearance is far superior to the old metal pipe type fence which readily rusts and
becomes unattractive so it will enhance any event.
Centurion Event Fence Mark 2
When you need a heavier barrier that will stand up to substantial force
then Our Mark 2 model could be the one for you.
Because it is manufactured using the plastic rotomolding method it creates a
barrier that can be filled with water or sand to provide real
strength and make it really difficult to push around.
When half filled it weighs 31 kgs and is 13 kgs when empty It is 2000mm long x 1060mm
high x 50mm thick It has a screw type water inlet and outlet and can
be easily filled on site It has all the other benefits of our Mark1
models with real strength when required.
|